Search In: Everything   Products

Perfect Pearls coated UTEE

Perfect Pearls coated UTEE

Here are some techniques to try using Perfect Pearls™.

Mix Ultra Thick Embossing Powder™ and Perfect Pearls™ to make a pearlized embellishment.

Technique by Patti Behan

Step 1: Pour approximately one tablespoon of Black UTEE and one teaspoon of Perfect Pearls in a jar. (Berry Twist was used in this example.)

Step 2: Cover jar and shake the mixture until the Perfect Pearls coat the UTEE granules.

Step 3: Coat Grungeboard™ with Perfect Medium by rubbing the ink pad directly on the shape.

Step 4: On a scrap piece of paper, pour UTEE/Perfect Pearls mixture onto the shape. Leave on a heavy coating.

Step 5: Carefully place the coated shape onto the Non-Stick Craft Sheet.

Step 6: Emboss the image with the Heat It Craft Tool. When you begin, keep the Craft Tool about 10-12 inches above the shape, so the powder does not blow away. As the powder begins to melt, slowly bring the Craft Tool closer to the diecut.

Step 7: Once the powder is completely melted, let cool. If any UTEE drips over the edges, you can trim with a scissor while it is still warm. Then add your embellishment to a card.