Ranger Blog: Home Decor/3D
Do you sometimes wonder about the possibilities your stamps may bring your way? I do and with the new Fronds stamps by Dina I kinda had this butterfly vision in my head that I had to put to the test! You see Spring is coming over, not much changes over in my island but I’ve seen pictures of crocus breaking ground and it’s exciting! Pretty soon the ground will be filled with blooms and butterflies and that is the inspiration for my project.
Step 1: Grab your supplies, stamp the big and medium open fronds over your tissue paper. I’m using embossing powder in black because my intention is to flip them over to create a mirror image, the darker the better! Once you have all the pieces, hand cut them and with the Gel Medium adhere them to your journal page. I have a confession: the new Ranger and Ice Resin Squeegee is my new addiction! It will help eliminate any pockets of air between your tissue and your surface, it’ll run so smooth you’ll start wondering where it was all your life!
Step 2: Using your Squeegee, yes, again, apply Gesso over your page to set the stage for your paints. You will notice you use less product, it dries faster and is more efficient. Since my inspiration is springtime I wanted to subdue Dina’s bold colors into a pastel palette by using white. And guess what Mr. Squeegee, you’ll use it to mix and apply the paint, it also works to apply paint over stencils too!
Step 3: By prepping your media board with gesso you have made it easy to use a baby wipe to remove paint using your stencils, that same paint can be smeared over the stencil in a different color base or even on the plain gessoed surface. Now it’s time to collage the wings using Gel Medium and prep them with the Clear Gesso. Then clean your stamp by ghosting the images directly on your journal. Using the Scribble Sticks, give her color and cheeks some color.
Step 4: Use a watercolor brush to work the watercolor magic of the new Scribble Sticks. Use the Enamel Accents to give the coat some buttons and give the shoes some patent leather look. Using some wipes “clean” the pink color over your stencils to give a subtle floral effect in your background. Then play with your alpha stencil to write your quote with the Fudeball, I loved mixing the different heights in the letters to give the words some movement.
Hello! My name is Milagros C Rivera and I’m a mixed media artists who loves to explore and experiment with all kinds of mediums. I was raised in a creative home, everybody did something ceramics, sewing, baking, jewelry, wood, glass, no medium was off limits! I continue to play and learn without having to restrict myself to just one thing! I live in the sunny island of Puerto Rico with my husband, 2 amazing kids and a menagerie of pets that make my life complete! I’m currently on the Design Team and Social Media Coordinator for Relics and Artifacts. You can find me on my blog as well as follow me on Instagram, Snapguide, and YouTube.
Creating handmade home décor pieces is an easy and fun way to add a bit of spirit to your home for the holidays and seasons. Join me today as we create a whimsical vignette box for spring and St. Paddy’s Day using lots of fabulous Tim Holtz Distress products.
Let’s get started!
Step 1: To begin, prime the sides of an Idea-ology Vignette Box with Picket Fence Distress Paint. Allow the paint to dry completely, and then cover all four sides and the top edge of the box frame with a variety of Design Tape. You can skip painting the box first, if you wish. But I find that the white paint underneath really helps emphasize the design elements on the tape.
Cut patterned paper to fit all four inside edges of the box, as well as the back panel. Adhere the papers using Ranger Multi Medium Matte and a foam brush.
Step 2: Dab a bit of Cracked Pistachio Distress Ink into the box using a Mini Ink Blending Tool. And then spread Vintage Distress Collage Medium generously all around the inside and outside of the box. Set the box aside to dry completely.
Step 3: Paint Multi Medium Matte into all four inside corners, and cover the adhesive with Distress Glitter Dust. Shake all excess glitter into a coffee filter, and pour it back into your container. Set the box aside to dry.
Step 4: Select a Clippings or Small Chat sticker and apply it to a piece of raw chipboard. Trim around the sticker and then age it a bit with Brushed Corduroy Distress Ink.
Step 5: Cut a few thin strips of paper to use as brackets for the sentiment. Fold the strips into an “L” shape, and cut the length to fit the depth of your box. Adhere the foot of the strip to the back of the sentiment, and then adhere the back of the strips onto the bottom of the box. Pour Distress Glitter onto any exposed adhesive.
Step 6: Color a Found Relatives die cut with Distress Markers, and watercolor using an Tim Holtz Waterbrush.
Step 7: Apply Picket Fence to the clover Adornments charm, and allow the paint to set for a minute before wiping away the excess. Color the clover with a Distress Marker. Cover the charm with Glossy Accents, and set it aside to dry.
Step 8: Apply a variety of green Distress Inks to a piece of watercolor cardstock using the waterbrush. Let the paper dry, or speed up the process with a heat tool.
Step 9: Die cut the three smallest hearts from the Heartfelt Bigz Die several times from the inked watercolor paper to create clovers. You need three hearts for each clover. Cover the hearts with Crazing Distress Collage Medium. Set them aside to dry.
Step 10: Scribble a bit of Vintage Photo Distress Crayon onto your Craft Sheet. Pick up the pigment using your waterbrush, and apply it to the crazing. Let the pigment soak into the cracks, and then wipe off the excess with a clean cloth or paper towel.
Step 11: Punch clouds from Watercolor Cardstock. Ink with Brushed Corduroy Distress Ink, and then coat the edges with Vintage Collage Medium. Once the medium is dry, adhere the clouds to the back of the vignette box. To create depth, adhere some pieces flat to the box with Multi Medium Matte adhesive, and pop some up with thicknesses of foam tape. Adhere moss to the bottom of the box. Adhere the clover charm to the girls neck using Multi Medium Matte, and once the adhesive has set for a minute, stitch a small bow around the charm using a needle and thread. Apply four thicknesses of foam tape to the backside of the girl die cut. Adhere her into the box.
Step 12: To create the clovers, place a small dot of Multi Medium Matte adhesive at the points of the hearts, and glue three hearts together. Gather some small twigs from your yard, and adhere pieces to the back. Place foam onto the back of the clovers, and add them to your box.
My name is Audrey Pettit. I live in Cary, North Carolina and have two wonderful kiddos, Peter and Nicole. I started scrapbooking and card-making about a decade ago after being invited to a friend’s house for a stamping party. That party opened my eyes to a whole new world of paper-crafting, and I have never looked back. Visit Audrey’s blog at: AudreyPettit.Wordpress.com.
Step 1: Gather supplies, including Distress Oxide Ink, Distress Crayons and Mixed Media Heavystock Tags.
Step 2: Add Distress Oxides Iced Spruce and Fossilized Amber plus Distress Ink Aged Mahogany to a Non-Stick Craft Sheet. Make sure inks do not touch. Spray droplets of water over the inks using a Distress Spray bottle.
NOTE: Because ink is suspended in the pad, you must press down on the ink pad when applying it to the Craft Sheet.
Step 3: Press or swipe a Mixed Media Heavystock Tag through the inks, picking up a little of each color. Begin drying the tag with Heat It Tool. Before the tag is completely dry, slowly pull the trigger of the Distress Sprayer to add larger water droplets over the tag and begin drying again. The additional water will make the ink separate and wick out to and create a chalky oxidized look. Very cool!
Step 4: Repeat steps until you are satisfied with the color.
Step 5: Create at least three tags that are similar in coloring.
Step 6: Using Vintage Photo Distress Oxide, stamp over one tag using the Vines & Roses stamp set.
Step 7: Use the Distress Sprayer to add water over the stamped image. Watch the Distress Oxide ink start to blur and separate. Start the drying process right away to control the spread of the ink.
Step 8: Once all tags are dry, cut them up into different size pieces.
Step 9: Use a Distress Brush and Distress Collage Medium to adhere the paper pieces to the back of a Framed Panel that has been previously painted with Picket Fence Distress Paint. Set aside to dry.
Step 10: Use your finger tip to smear a thin layer of Distress Grit-Paste on the edges of a Mini Cabinet Card Frame. Let dry completely.
Step 11: Once dry, scribble over the Grit-Paste and frame with Aged Mahogany and Gathered Twigs Distress Crayons. Spritz with a light mist of water and rub the crayon into the frame. If you rub too much away, you can always add more.
Step 12: Use Distress Markers to tint a Paper Doll by coloring the image and then rubbing away the excess ink with a cotton swab.
Step 13: Spray at least two bunches of paper flowers from the Bouquet pack with Antique Linen Distress Stain Spray. Make sure the front and back are covered. Let dry completely.
Step 14: Slip a small piece of linen from the Textile Surfaces pack into the Mini Cabinet Card Frame. Adhere Paper Doll, Clippings Stickers and Adornments wand to the Framed Panel with Collage Medium. Drop all the paper flowers onto frame and glue where they fall to create an organic look. Add string that has been colored with Vintage Photo Distress Ink to the flowers using Collage Medium.
Step 15: Once paper flowers are secure, add a bit of Stickles Platinum onto each flower stamen for a little bit of sparkle.
I have been a “maker” all my life. Sewing, stamping, paper arts, I love it all. Creating and teaching is a passion for me, whether it is in the classroom or on my blog, One Lucky Day. I have worked in the scrapbooking/mixed media field since 2005 and for the last five years I have worked as the Creative Coordinator for Tim Holtz Brands, a dream job if there ever was one. On a personal note, I live on the Central Coast of California with my husband, Jay. I love to travel to new places to look for old junk and am willing to pack a bag at a moment’s notice. On an ordinary day you can find me working away in my craft room with the windows wide open and music playing in the background.
Step 1: Apply strips of Adhesive Foam to the canvas, creating a frame shape. Peel the protective paper from the foam. Apply a coat of Opaque Crackle paste to the top & sides of the Foam Tape.
Step 2: Dry with a Heat Tool. Note: Keep Heat Tool about 8” from the surface and keep it moving. As the paste dries and becomes matte you can move the Heat Tool closer to the canvas. We want the paste to dry not bubble. As the paste dries, it will crackle, and the black foam will show from between the Crackle Paste. Let cool completely.
Step 3: Paint the inside of the frame with Black Gesso. Let dry. Apply various colors of the Foil Sheets to the cracks by randomly pressing sheets of foil onto the sticky, exposed areas of foam, colored side up.
Step 4: Cut a Dyary Die Cut in half. Color the Die Cut with Dylusions Paint Pens. Attach the Die Cut with an Adhesive Strip to the inside, bottom of the frame.
I love getting and sending letters. An email is quick and easy but a handmade card or handwritten letter is more personal; don’t you think so too? The only bad thing is that the cards I receive are lying around everywhere. I don’t have a proper place to store them. So time to make myself a Dylusions style letter rack.
Step 1: I started with adding a thin layer of gesso to the letter rack. The letter rack is made of MDF which is brown. The colours won’t come out so brightly if you don’t add a layer of gesso first. Untreated, the MDF will absorb a lot of the paints also, which is a waste of paints. Pick out some nice Dylusions colours (I’ve used Cherry Pie , Crushed Grape, Tangerine Dream and Bubblegum Pink) and add the paints with a Mini Blending Tool to the surface of your letter rack. Mind that you don’t blend the Tangerine Dream (orange) with the Crushed Grape…you will create mud if you do. I’ve used the red and pink as a border between the orange and the purple, because both the red and pink go well with either the orange or the purple. Choose a few stencils and use the Mini Blending Tool to add some structure to all the sides of the letter rack. Use one stencil with White Linen, white will make the colours pop. Let all the sides dry and assemble the letter rack.
Step 2: Now that the painting is finished, I start with decorating the letter rack. I stamped a lot of the Doodle Blooms with Archival Ink (Jet Black) and recoloured all the black parts of the stamped image using the Dylusions Paint Pen in Black Marble. I hardly ever think that the stamped image is black enough so I normally colour all the black parts again with a paints pen. Glue all the flowers to the letter rack using gel medium (matte). I drew some stems with the Dylusions paint pens Black Marble and White Linen. For the leaves I used the Branching Out stamp set. Cut out the leaves in pairs or singles and glue them on the stems of the flowers. And the letter rack is finished.
Step 3: Here you see all sides of the letter rack. In the end I decided to add a little birdy and a caterpillar from some older Dylusions stamps sets.
Step 4: For this project I also made a card (a5 size). I have painted the background in exactly the same way as shown in Step 1. I stamped the flowers of the Anatomy of a Page set on my background and on a separate piece of watercolour cardstock. I coloured the flowers on the watercolour cardstock with coloured pencils. Cut out all the flowers and glue them to the stamped ones on the background. This way I don’t have to cut out all the stems and tiny leaves.
Step 5: For the rest of my card I stamped a variety of stamps and just started colouring.
Step 6: For this background I used Tangerine Dream, Bubblegum Pink and Funky Fuchsia. In the end I used one of the Doodle Blooms, a Puddy Cat and at the top I used the new Foliage set.
Step 7: I have decorated an envelope, as well. Kept it quite simple just by using a stencil (Flower Pop) and the Bubblegum Pink Dylusions Mica Spray. I might add some doodling later, if I know to whom I will send the card. Make the envelope a bit more personal too.
And this is the letter rack with the card and envelope.
My name is Miranda van den Bosch and I live in Ridderkerk, which is a small town in the Netherlands. I have been painting and drawing since I was 4. I mainly painted portraits and animals. In 2010 I discovered art journaling and the fabulous world of Dyan Reaveley’s Dylusions and I got hooked ever since. I love the many possibilities you have with the stamp sets. You can create new images over and over again by combining new sets with older sets…..and the colours of the inks and paints aren’t they just dylucilious???
My Blog: http://mirandascardcreations.blogspot.nl/
My Facebook : https://www.facebook.com/miranda.vandenbosch.94
My Instagram : https://www.instagram.com/macbo27/
Hey there beautiful people…I am thrilled to have been asked back by the amazing Ranger team to share another project with you today.
It’s very cold in the UK at the moment but that doesn’t stop me thinking about the coming of Spring and the long lazy days of summer. With that in mind I wanted to create a bright and cheerful project for you to get those creative juices flowing. I hope you enjoy as much as I enjoyed creating it…
Step 1: Gather fabric scraps, I used old pieces of lace and ribbons as well as a pack of the Dylusions Blank Self Adhesive Canvas.
Step 2: Take a sheet of the self-adhesive canvas, peel off the backing and press the sticky side against an old piece of cloth a few times to get rid of the stickiness then cut some slits in the end approx. ¼ inch apart. Hand tear each strip (some will curl more than others).
Step 3: Arrange the pieces of lace, fabric and ribbons onto the canvas gluing down with Matte Medium and then glue the torn canvas strips at one end only allowing them to hang loose on the canvas. Once all the fabric is on using Texture Paste and your palette knife I added some texture with the Dylusions large leaf stencil.
Step 4: Now cover the whole canvas including the fabric scraps with a coat of white gesso.
Step 5: Gather up your chosen paint colours and a water mister bottle.
Step 6: Take your first colour (I chose Vibrant Turquoise mixed with White Linen) and spritz with water to give a runny consistency.
Step 7: Hold the canvas at 90 degrees and start adding the colour to the canvas allowing it to start to run. If it’s not running as much as you’d like, then spritz directly with some more water.
**please note I like to dry with a Heat Tool between each paint colour**
Step 8: Repeat step 7 with more colours (this time I chose Melted Chocolate and Funky Fuchsia mixed with a little white) For the lace and fabric along the bottom of the canvas I turned the board on its side so the drips are running in line with the direction of the fabric.
Step 9: I then went back in with some of the Vibrant Turquoise, Funky Fuschsia and Fresh Lime, but this time I didn’t mix with any white so I would get bolder brighter colours. Repeat step 7 until you are happy with the result.
Step 10: Dry the canvas completely and then using the Vibrant Turquoise and Funky Fuchsia I mixed the colours with water and loaded up a paint brush. Lightly tap off over the canvas to create splatters.
Step 11: Next I stamped the roses from the ‘Branching Out’ stamp set directly onto the canvas board in various places along the edges of the fabric. I then painted with a mix of Pomegranate Seed, Funky Fuchsia and Bubblegum Pink.
Step 12: Using Jet Black Archival Ink, I stamped out some more of the roses and also one of the flowers from the ‘Doodle Blooms’ stamp set into smooth white card.
Step 13: I painted the flowers, again using a mix of Pomegranate, Funky Fuchsia and Bubblegum Pink. I then cut out the flowers and adhered to the canvas using 3D foam.
Step 14: Next I mixed some of the white paint with water so that it was runny and loaded up a brush, tapping it over the canvas and flowers to create more splatter.
Step 15: Next I used a fine brush and some Matte Medium to add areas of glue to the canvas, I then sprinkled with the Enchanted Gold Embossing Powder and heat set to add some sparkly accents.
Step 16: For the next step I used Tim’s alphabet stamps and stamped the word ‘Bloom’ onto smooth white card using the Embossing Ink Pad.
Step 17: I covered the stamped word with the Black Embossing Powder and heat set to give a glossy raised finish.
Step 18: For the finishing touch, using Tim’s scissors (they have a nice sharp point which is perfect for cutting out small shapes) I cut around the letter and then adhered to my canvas using the 3D foam tape.
My name is Tracy Scott and I’m a mixed media artist from East London in the UK and I’m here today with a ‘Holiday’ themed tutorial using Dyan’s most fabulous Dylusions Paints and products….
Holiday preparations are well and truly underway in our house, present shopping and wrapping is happening as we speak and plans for all the lovely home cooked goodies we will be having this season to share with family and friends.
For my tutorial today I wanted to show you how easy it is to paint your own holiday welcome sign (Dyan Style of course !!!) for when all of those guests come to visit !!
Step 1: I chose an 11×9 wood panel for my substrate but you could easily adapt this to use one of Dina’s fabulous mixed media boards (it wouldn’t be quite so heavy to hang !!) I coated the whole board with gesso and then using a mix of Dylusions paint, I used Fresh Lime, White, Vibrant Turquoise and Dirty Martini, I spread these randomly over the board with my fingers blending the colours together as I went.
Step 2: I force dried with a Heat it Tool allowing the paint to blister and bubble slightly to add a little texture to my piece (I didn’t want too much texture as this would be harder to paint over later)
Step 3: My favourite colour combination at the moment is Dylusions Pomegranate, Cherry Pie and Bubblegum Pink, they are just so totally rich when used together on a project and when used against the greens in this background it is just stunning !!!
Step 4: Starting with the Pomegranate first I used my fingers to paint this on in a circle on my board, layering the Cherry Pie on top and then the Bubblegum Pink on top of that, allowing the colours to slightly blend together as they are applied, thinking about where the light and shadow will fall and which direction the light is coming from I finally added white for a highlight.
Step 5: I repeated this process in several places over my board paying attention to the ‘light source’ to add shadow and highlights with the paints. (I partially overpainted one of the circles so that it appeared to be tucked into the background to add some more depth)
light is coming from I finally added white for a highlight.
Step 6: Using a mix of the green and blues paints again I added some shadows to my board using the same ‘light source’ as used for the circles.
Step 7: Moving on to the Black Dylusions paint and a small paint brush I painted in the top of my baubles, down the left hand side (again paying attention to my light source) and added some line details to some to give added interest.
Step 8: Using the black and white Distress Crayons I began adding more shadow and light details both on the baubles rubbing in with my finger but also using the black underneath to add even more depth.
Step 9: Using Dyan’s fabulous paint pens I started to add some finer details to my painting, adding the strings to my baubles so that they can hang in the tree.
Step 10: Next I took the small Dylusions Stars Stencil and some White Linen Dylusions paint and added randomly to my background, I masked off the baubles with some washi tape and used a blending tool to get a good coverage on the white.
Step 11: Of course you can’t have baubles without a bit of glitter and the Mercury Glass Stickles is just perfect to add a little touch of sparkle. I added randomly on the baubles and then added touches around the board.
Step 12: Water down some White Dylusions Paint and use the Tim Holtz Splatter Brush, add randomly all over the board, force dry with a Heat Gun so that the drips bubble.
Step 13: To frame the edge of my board I used the Black Distress Crayon and started to layer on, smudging with my fingers and building up the layers.
To finish my project I just had to choose one of Dyan’s ‘fabulous’ quotes and I knew that this one was just perfect….a holiday welcome sign…’Dyan’ style !!!
Thank you for stopping by today. I’ve had an absolute blast creating this project and know that you will too. Give it a go and have a very happy holiday xx
My name is Tracy Scott and when not at the day job as a finance officer in East London UK I love nothing better than getting inky and painty. Colour is my passion and as long as it’s completely bright and over the top then I’m all over it. The brighter the colours the more I love it…nothing dull and brown for this girl I’m afraid !! I am passionate about art journalling and mixed media and love to share my knowledge with all like minded arty friends!
Find me at my blog: firstname.lastname@example.org
Facebook page: www.facebook.com/myjournallingjourney
Step 1: Using pliers take the Assemblage Clock apart. Die cut snowflakes using Metal Foil Tape Sheets. Peel and stick the snowflakes to the clock and bell pieces. Apply Snow Cap Alcohol Ink Mixative to a felt pad with a few drops of Blending Solution and pounce all over the clock pieces (clock body, bells, feet, hands, etc.). Apply Cloudy Blue and Aqua Alcohol Ink and a few drops of Blending Solution to the felt pad and randomly pounce over the snowflakes. Reassemble clock. Trace the back of the clock onto Tiding Paper Stash of your choice. Cut inside traced line to fit clock backing. Attach paper to the backing of the clock using foam tape.
Step 2: Stamp cabin with Distress Black Soot Archival Ink. Color image with Distress Crayons or Distress Markers, blend color with a Detailer water brush and let dry. Cut image out with scissors. Apply Glossy Accents to roof, snow and trees, pour Clear Rock Candy Distress Glitter over image, shake off excess and let dry. Attach game pieces, or the like, to the back of the cabin to elevate it off the back of the clock.
Step 3: Cut off the base of the trees and trim the back so they are flat. Spray Woodland Trees with Evergreen Bough Distress Spray Stain and let dry. Apply Picket Fence Distress Paint with fingers to the tips of the tress and let dry. Apply Glossy Accents with finger to the tips of the tress, sprinkle with Clear Rock Candy Glitter, shake off excess and let dry. Adhere trees to the back using hot glue.
Step 4: Adhere cabin to the clock with hot glue. Apply a few drops of Gold Metallic Alcohol Ink Mixative and a few drops of Blending Solution to a cotton swab. Rub the color on the deer and then use the dry end of the cotton swab to rub off the high point to create shaded areas. Trim the deer’s front legs as needed. Adhere deer to the clock with hot glue. Color Type Token with Picket Fence Distress Crayon and wipe off excess. Crayon will remain in the letters.
Step 5: Die cut greenery from green cardstock, sand and ink the edges with Vintage Photo Distress Ink using an Ink Blending Tool. Apply Snow Cap Alcohol Ink Mixative to the metal pieces (jingle brads, pinecones, ice skates, jump rings and swivel clasp and chain). Apply Clear Rock Candy Glitter to greenery and metal pieces with Glossy Accents, let dry. Install twinkle lights around the face of the clock if desired.
Step 6: Adhere greenery to clock using Glossy Accents. Attach jingle bells, ices skates, and pinecones to swivel clasp with jump rings and attach to handle. Tie Crinkle Ribbon around the clock handle with a big bow. Apply Remnant Rubs snowflakes to glass front and the inside as desired. Add Clear Rock Candy Glitter to the inside of the clock for snow and put backing on clock.
I’m a California girl and currently live in the Sacramento area with my husband Del. Our children are both married and live close by with their families! I have four beautiful grandchildren.
Ever since I was a little girl I have had a love for art, sewing, quilting, and crafting. I’ve been working in the paper crafting industry since 2001 and it has lead me on an unforgettable journey. I currently have the job of my dreams working as the Project Manager for Tim Holtz. My designs have been displayed by Tim Holtz, Ranger Ink, Stampers Anonymous, Advantus, Sizzix, Hero Arts and I have been published in several papercrafting and quilting magazines. You can visit her at her blog, California Art Girl.
Step 1: Place a cardstock scrap under the area to be stenciled. This prevents ink from being transferred thru the towel.
Choose your Archival Inks. Place the “Merry Christmas” stencil over the striped area and use Painter’s Tape to mask off the surrounding area. This also holds the stencil in place.
Use Watering Can with the Mini Blending Tool to stencil.
Step 2: Position the larger pine tree slightly to the left of center and stencil with Garden Patina. Use a Q-Tip to transfer Potting Soil ink to the tree trunk area.
Step 3: Place tape over the stripe to mask it off. Turn the stencil over to get a slightly different version of the tree.
Position the tree so that the bottom is on the tape, allowing a shorter tree to be stenciled. Stencil the tree with Fern Green.
With the tape still in place, stencil a shorter tree to the left, using Fern Green.
Step 4: Now switch to the small tree stencil. With tape in place, stencil a short small tree, using Garden Patina.
Step 5: Now stencil the full small tree to the right, using Fern Green.
Step 6: Position the Polka Dotty stencil and line up a row of dots, directly under the striped border. Mask off the area above and below the dots and stencil one row of dots, using Garden Patina.
Step 7: Stencil a large and small star using Watering Can on the right side. Stencil a small star to accent the small tree on the far left.
Step 8: Tap the spatter stamp onto the Watering Can pad and lightly add “snowflakes” around the trees.
Step 9: Dry and heat set the inks with the Heat-It Tool or iron.
Additional Example: If you prefer more traditional holiday colors, here’s another example.
This uses Fern Green, Jet Black, and Buttercup archival ink for the stars.
Tips & Hints:
Archival Ink is the ink of choice for stenciling on fabric, since it is waterproof and permanent when dry. These can be washed with no problem. As long as the ink is dry, the design is permanent.
Choose a towel with a small amount of texture. This adds to the texture of the trees.
Painter’s Tape holds the stencil securely in place and also keeps the background protected.
The Mini Blending Tool is my choice for stenciling. The smaller footprint is perfect.
When stenciling on fabric, I find it best to tap, twist and turn the Blending Tool over the stencil. This seems to work perfect and it doesn’t stretch or move the fabric. Rubbing sometimes moves the fabric under the stencil.
Think holiday hostess gifts! I’m thinking these would be fun to send instead of a card!
These can be customized to fit any decor. Use traditional holiday colors or change it up like this towel. These can be created in 10 to 15 minutes. SERIOUSLY…it’s much quicker than writing the instructions!
Wendy Vecchi is a Signature Artist for Ranger Ink. Her designer series archival inks and embossing powders take inspiration for a vintage country garden color palette. Wendy also designs a line of stamps, stencils, Art Parts, and Clearly for Art with Stamper’s Anonymous. You can learn more about Wendy, get a link to her blog, see projects and videos by Wendy, and check out her teaching schedule on her Ranger Designer Page. Be sure to follow our Wendy Vecchi Pinterest board for even more inspiration!
With the holiday season right around the corner, it’s time to start thinking of gift ideas for those special people in our lives. Finding the perfect gift can be difficult, so why not make a set of personalized coasters using your very own photographs this year!
Step 1: Begin by choosing the images you would like to use. For this project, I used 4 ¼” x 4 ¼” glazed white tiles, so I made the photos 3 5/8” w x 3” h. Once the images are sized, print on cardstock and cut out.
Step 2: Working on a craft sheet, coat the cut out images with ICE Resin® Paper Sealer. Be sure to evenly coat the front, back and sides of the paper. Let Paper Sealer dry completely before continuing on.
Step 3: Once your images have completely dried, grab your tiles and place them on your craft sheet. Before working on your tiles, wipe them down with a paper towel and rubbing alcohol to make sure the surfaces are clean. Paint a coat of Paper Sealer on the back of the images. Once painted, turnover and place on the tile. Repeat for each tile. Let dry.
Step 4: Mix ICE Resin® according to the instructions on the labels. Begin with adding 1 oz. of Part A Resin to your mixing cup, followed by 1 oz. of Part B Hardener. Slowly fold the two parts together until well mixed. Continue mixing thoroughly for 2 minutes until the resin becomes slightly opaque. Let rest for 5 minutes before using.
Step 5: Slowly pour a small amount of ICE Resin® into the center of your coaster. Be sure to not over pour, remember it is easier to add more if needed then it is to remove if you’ve added to much. Using your stir stick slowly push the resin out to the edges. ICE Resin® is self-doming which allows for it to be worked all the way to the edges and not overflow, as long as the resin is not over poured and there is too much.
Step 6: Once all coasters have been coated in ICE Resin® set aside. Let dry overnight.
Step 7: When your ICE Resin® coasters have fully hardened, attach vinyl bumpers to the four bottom corners of the tiles to help prevent the tiles from scratching any surfaces while using the coasters.