 |
Step 1: Pour approximately one tablespoon of Black UTEE and one teaspoon of Perfect Pearls in a jar. (Berry Twist was used in this example.) |
|
 |
Step 2: Cover jar and shake the mixture until the Perfect Pearls coat the UTEE granules. |
|
 |
Step 3: Coat Grungeboard™ with Perfect Medium by rubbing the ink pad directly on the shape. |
|
 |
Step 4: On a scrap piece of paper, pour UTEE/Perfect Pearls mixture onto the shape. Leave on a heavy coating. |
|
 |
Step 5: Carefully place the coated shape onto the Non-Stick Craft Sheet. |
|
 |
Step 6: Emboss the image with the Heat It Craft Tool. When you begin, keep the Craft Tool about 10-12 inches above the shape, so the powder does not blow away. As the powder begins to melt, slowly bring the Craft Tool closer to the diecut. |
|
 |
Step 7: Once the powder is completely melted, let cool. If any UTEE drips over the edges, you can trim with a scissor while it is still warm. Then add your embellishment to a card. |
|
