Search In: Everything   Products

Father’s Day Card by Bobbi Smith

Father’s Day Card by Bobbi Smith

Instructions

Hi everyone, Bobbi here. I’m really happy to be with you on the Ranger blog today! Father’s Day is going to be here before we know it, so let’s get ready for it by making a card just for Dad!

Father’s Day Card by Bobbi Smith

Step 1: Working on a Non-Stick Craft Sheet swipe some Distress Oxide Spiced Marmalade. Spray droplets of water onto the ink using a Distress Sprayer bottle. Press or swipe a 4 1/4 x 5 1/2 sheet of Distress Watercolor Cardstock through the ink, picking up the color. While the Distress Watercolor Cardstock is still wet, slowly pull the trigger of the Distress Sprayer to add larger water droplets. Then dry with Heat It Tool. To add more Distress, pick up droplets of color off the Non-Stick Craft Sheet with the Distress Watercolor Cardstock, blotting to pick up the color (not swiping), then drying with Heat It Tool.

Father’s Day Card by Bobbi Smith

Step 2: Repeat the above steps to a second sheet of Distress Watercolor Cardstock using Fired Brick Distress Oxide.

Father’s Day Card by Bobbi Smith

Step 3: Squeeze a couple drops of Pumice Stone Distress Paint onto a Non-Stick Craft Sheet, and lightly mist the paint with water. Press the smooth side of the Distress Watercolor Cardstock into the paint mixture until covered. Dry with a Heat it Tool. To add more distress, pick up droplets of color off the Non-Stick Craft Sheet with Distress Watercolor Cardstock, blotting to pick up the color (not swiping), then drying with Heat Tool.

Father’s Day Card by Bobbi Smith

Step 4: Swipe some Distress Oxide Broken China onto the Non-Stick Craft Sheet. Spray droplets of water onto the ink using a Distress Spray bottle. Pick up color with Distress Splatter Brush for additional interest to colorized Spiced Marmalade Distress Watercolor Cardstock. Then dry with Heat It Tool.

Father’s Day Card by Bobbi Smith

Step 5: Place the Dot Fade Layering Stencil over the top of your colored Distress Watercolor Cardstock. I like to secure mine with washi or painters tape. Spread a thin layer of Distress Grit Paste sporadically through stencil. Carefully lift and remove layering stencil. Set Distress Watercolor Cardstock aside to air dry. Make sure to immediately clean your layering stencil and Ranger Pallet Knife right after use.

Father’s Day Card by Bobbi Smith

Step 6: Create a banner for card front from a 2×4 piece of Tim Holtz Classic Kraft – Black Cardstock. Cut a notch out of bottom. Die cut the word “best” in banner using Tim Holtz Sizzix Sentiment Words thin die set. Cut a 3.50×4.75 sheet of Tim Holtz Classic Kraft – Black Cardstock. Die Cut “Happy Father’s Day” using same die set as above.

Father’s Day Card by Bobbi Smith

Step 7: Die cut the base helicopter and the word “you” x2 (Sentiment Words) from Tim Holtz Classic Kraft – Black Cardstock. All helicopter parts are from Tim Holtz Sizzix Cityscape Commute die set. Die cut overlay helicopter blades from colored Pumice Stone Distress Watercolor Cardstock. Die cut the helicopter body and the word “dad” x2 from Fired Brick Distress Watercolor Cardstock. Save all those extra pieces for a future project.

Father’s Day Card by Bobbi Smith

Step 8: Cut a piece of Tim Holtz Classic Kraft – Black Cardstock 5 1/2 x 8 1/2 and fold in half to create cardbase. Distress all black cardstock with sanding grip to expose the underlying kraft.

Father’s Day Card by Bobbi Smith

Step 9: Shade all paper pieces with Walnut Stain Distress Ink and Blending Tool with Foam around edges. Further distress paper edges with paper creaser. To create the X, cut the end of 2 Y’s and glue together with a little Glossy Accents.

Father’s Day Card by Bobbi Smith

Step 10: Glue helicopter body and blades to helicopter base with Glossy Accents. Adhere a few small pieces of Ranger Black Adhesive Foam to back of helicopter. Glue a small piece of Tim Holtz Eclectic Elements Craft Thread about 3/4 inch long to X using Glossy Accents the attach to back of helicopter.

Father’s Day Card by Bobbi Smith

Step 11: Adhere Ranger Black Adhesive Foam to back of banner and Happy Father’s Day insert. Attach banner to top left side of colorized Spiced Marmalade sheet. Then adhere to card base with Glossy Accents.

Father’s Day Card by Bobbi Smith

Step 12: Adhere “Dad” to banner using Glossy Accents. Attach helicopter and XO with Glossy Accents as well. Wrap a little Tim Holtz Eclectic Elements Craft Thread around an index clip and attach to top of banner.

Father’s Day Card by Bobbi Smith

Step 13: Last but not least, attach the “Happy Father’s Day” insert to inside of card.

Father’s Day Card by Bobbi Smith

Bobbi SmithMy name is Bobbi Smith. I’ve been a crafter all my life, however I really found my niche in paper-crafting about 20 years ago, when my children were young and have never looked back. I love all forms of Art, but really gravitate towards vintage, distress and grunge styles. I live in Illinois and love to hunt for vintage finds, when I’m not paper crafting!  Check out my blog at Vintage Muse Designs.