Hello Card by Kathy Paglia

Wendy Vecchi MAKE ART Perfect Cardstock: White Panels, White Card Wendy Vecchi MAKE ART Blendable Dye Ink: Garden Patina Wendy Vecchi MAKE ART Stay-tion Letter It™ Stamp: Friendship Letter It™ Embossing Ink Letter It™ Stencil: Flower Burst Letter It Surfaces: Assorted Tags Letter It™ Acrylic Block Letter It™ Adhesive Foam: Clear Foam, White Foam Ranger Embossing Powder: Bubbly Stickles™: Unicorn ICE Resin® Silk Sari Ribbon:...

Instructions

 

Hello Card by Kathy Paglia Step 1

Step 1: Trim a piece of Wendy Vecchi MAKE ART Perfect Cardstock White Panel to 4” x 5.25” Gently stamp directly onto the Gel Plate with the Wendy Vecchi MAKE ART Blendable Dye Ink, applying ink to plate. Spray with water using the Tim Holtz Distress® Sprayer. Place the white panel over the inked area. Cover with a plain piece of paper to mop up the ink that is outside the panel. Lightly smooth over the paper with your open hands so the ink can<span> </span>transfer to the card panel. Lift plain sheet and discard. Lift card panel and see the ink has been transferred from the plate to the panel. 

Hello Card by Kathy Paglia Step 2

Step 2: Once dry, place inked card panel, Letter It™ Flower Burst stencil, and small craft sheet on top of the Wendy Vecchi MAKE ART Stay-tion and hold in place with the magnets. Squirt Unicorn Stickles™ onto the craft sheet and swirl Mini Ink Blending Tool and Foam into the Stickles. Apply Stickles to card through stencil by gently swirling Blending Tool over stencil. Set aside to dry.

Hello Card by Kathy Paglia Step 3

Step 3: Pat the small white tag from the Letter It™ Assorted Tag pack with the Ranger Anti-Static pouch. Place the “hello” stamp from Letter It™ Friendship onto the Letter It™ Acrylic Block. Ink with Letter It™ Embossing Ink Pad and stamp image on the small white tag. Cover stamped image with Bubbly Ranger Embossing Powder. Heat embossed image with Heat It Craft Tool to melt powder.

Hello Card by Kathy Paglia Step 4

Step 4: Cut a piece of ICE Resin® Silk Sari Ribbon. Attach Sari Ribbon by threading through the hold in the tag. Trim with scissors if needed.

Hello Card by Kathy Paglia Step 5

Step 5: Apply Letter It™ Adhesive Clear Foam to the inked panel and apply to card front.

Hello Card by Kathy Paglia Step 6

Step 6: Apply a layer of Letter It™ Adhesive White Foam to the tag and stick it to the card panel. 

 

Related Posts

Distress Spritz Tag Card by Cheiron Brandon
July 18, 2024
Distress Spritz Tag Card by Cheiron Brandon

...

Read More
Simon Hurley create. Sketched Snowmen Card by Lieschen Harshbarger
July 12, 2024
Simon Hurley create. Sketched Snowmen Card by Lieschen Harshbarger

Read More